|
Electronic Projects |
| # | Project | Info |
| 01 | Breadboard Power Supply Module | 3.3v or 5v selectable. 3 different inputs (barrel jack, miniUSB, screw terminal block). |
| 02 | 5-Button Switch Module | 5-button terminated switch module for breadboards. |
| 03 | Real Time Clock (RTC) Module | PCF8523 RTC chip with battery backup, for breadboards. |
| 04 | Buzzer-Type Speaker Module | Small, unobtrusive, adjustable, amplified buzzer speaker designed for breadboard use. |
| 05 | LED Dot Matrix Module: Chicago Dice! | Arduino Nano microcontroller-based game, with expansion connector. |
| 06 |
Powered expansion boards for Adafruit Feather microcontrollers like the Adafruit Feather M4 Express. Each PCB permits 3 or 4 FeatherWings to attach to a 2.4" or a 3.5" FeatherWing TFT-touchscreen display. |
|
| 07 | 3v3 to 5v Level Shifter | Breadboard-connect your new 3.3v peripherals to older 5v microcontrollers like Arduino Uno or Arduino Nano. |
| 08 | ItsyBitsy Roller Needs rework) | Adafruit ItsyBitsy M4 Express or ItsyBitsy RP2040 based Neopixel gaming board. |
| 09 | Bakk Tracker | Adafruit GPS used to track your way back to your starting point. |
| 10 | QT-PY RGB LED Die |
Project A: Adafruit QT-PY and a 3x3 matrix of LEDs. Project B: Adafruit QT-PY and two 3x3 matrices of RGB Neopixel LEDs. |
| 11 | Neopixel 3x3 Array | Neopixel 3 x 3 array board to add to your projects. |
| 12 | Breadboard SMT Power Supply | 3.3v or 5v selectable. 2 different inputs: barrel jack or miniUSB. |
| 13 | SMT 3v3 3A / 5v 5A Power Supply | Same as the above one but it's a higher current PCB that you can attach to your breadboard or quickly solder to your project bd. |
| 14 | Neopixel 5x5 Array | Neopixel 5 x 5 array board to add to your projects. |
| 15 | Nano Neo | Arduino Nano-based RGB Neopixel board with 3 add-on boards: power supply, amplified buzzer and 5x5 Neopixel array. |
| 16 | Nano Neo Strands | Arduino Nano-based driver board for up to 4 strands of Neopixel RGB LEDs. |
| 17 | QT-PY 8x8 RGB LED Dice | Adafruit QT-PY driving two 8x8 RGB LED matrices. |
| 18 | Single-Multistep CPU Clock Module | A PCB using Ben Eater's 1-500Hz CPU Clock design for both single-step and multi-step functions. |
| 19 | Variable CPU Clock Module | A PCB using Ben Eater's 1-500Hz CPU Clock multi-step design. |
| 23 |
Project 23:
Weather Inside |
The Aduino Weather Inside app running on a small PCB. |
| 24 |
Project 24:
9DoF |
An Adafruit Nine degrees of freedom orientation IMU, weather sensor and a 2.0" display. |
| 25 |
Project 25:
Accelerometer |
An Adafruit accelerometer, weather sensor and a 2.0" display. |
| What's next??? | ||
Updated 2023-03-13 @ 8am
